NO1 steam inlet
NO2 raw material inlet

NO3 concentrate liquid outlet
NO4 condensed water outlet
NO5 cooling water inlet
NO6 cooling water outlet

1.1st heater
2.1st separator
3.2nd heater
4.2nd separator
5.3rd heater
6.3rd separator
7.vapor-liquid separator
8.condenser

9 the discharge pump
10 cooling water pump
11 water ring type vacuum pump

    The evaporation equipment are: flow, cross flow, countercurrent evaporation process, according to the different characteristics of the material, adopts different evaporation technology and equipment material. Realization of continuous feeding, continuous discharging, semi automatic management, in the original basis to further optimize the process, greatly reducing the labor force, in order to avoid evaporation process caused by improper operation run material advantages.

    One, applicable scope:

    Applicable to the pharmaceutical, glucose, starch, food, chemical industry, nickel sulfate liquid concentration and environmental engineering wastewater treatment recycling, can satisfy the process requirements of heat-sensitive materials concentration.

    Two, equipment characteristics:

    A, mainly composed of a effect heating chamber, an evaporation chamber, two effect heating chamber, an evaporation chamber, three effect heating chamber and condensed water receiving device, a preheater, a liquid level controller comprising such a device. Using SUS304 stainless steel refining.

    B, evaporation temperature is low, does not damage the material liquid material, especially suitable for the concentration of thermal sensitive materials.

    C, the evaporation speed, evaporation capacity is more than 4 times the national stereotypes of the evaporator, and low steam consumption of about 70%.

    D, concentration ratio of major, materials for stainless steel equipment sealing without bubble under concentrated, products meet GMP standards.

    Three, evaporation capacity: 500～ 100000kg/h ( Series)